|
|
|
 |
|
.jpg) | TOP |
|---|
The main spindle is supported at three points by precise bearings for precise cutting.
The feed mechanism permits positive shift from the normal feeds to the reverse, and vice versa.
Bed is so designed to prevent torsion, side-wall is double wall and rib type.
The machine is equipped with an overload safety device for feeding and thread cutting.
An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop.
The spindle speed is 12 stepped that can be changed high and low speed by lever.
Lower portions of bed casting are box shaped and full length forming the legs, chip pan and coolant reservoir.
Bed and leg is made of one piece frame and bed ways are box type.
The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock.
Automatic lubrication system supplies lubricant to every sliding way and driving mechanism inside the headstock.
Hardened and ground bed ways are made of high tensile meehanite cast iron.
| |
|
.jpg) | TOP |
|---|
Wide and Stable bed way for absorbing vibration
High rigid bearings in Head stock
Hydrualic brake system in head stock (HL-460/580/630/720)
Foot brake in front of machine
Overload clutch in apron for cutting load
No speed up during operation to prevent gear from breaking (HL-460/580/630/720)
Apron safety device with limit dog to avoide collision (HL-380/460/580)
| |
|
.jpg) | TOP |
|---|
 | Headstock Maintenance of high prcision, low noise, durability thanks to the heat treatment and grinding on the gear.
High speed operating with the angular type of spindle bearing.
Heavy duty gear head |
 | Tail stock Double power clamping device
Tailstock quill reduction equipment (1:1 or 1:5) |
 | Tool post Excellent smoothness and durability with heat treatment and grinding on the screw.
Consecutive operating of a few kinds and mass production with mricr stopper (option). |
 | Gear Box 8 stepped feed change in Gear box. Available any speed in this range.
Hardened and ground gears |
 | Chuck Chuck range : 7" (HI-380/410), 9"(HL-460), 10"(HL-580), 14"(HL-630/720).
|
 | Inch-metric change lever, no-need gear change. (HL-410/460/580)
Reduction of idle time and increase of working efficiency. |
 | Digital counter (Sony) Available for three axis
|
 | Various Switches Various Switches Power off/on, Power Lamp, Coolant Lamp, Coolant off/on,
Emergency stop button, Inching switch (from the left) |
|
|
.jpg) | TOP |
|---|
 | |  |
| Steady rest | | Follow rest |
 | |  |
| Taper Attachment | | TChanging gear |
 | |  |
| Micro stopper | | Chasing Dial |
|
|
.jpg) | TOP |
|---|
| Description | Unit | HL380 | HL410 | HL460 | HL580 | HL630(720) |
| 750 | 1000 | 1000 | 1500 | 1500 | 2000 | 2000 | 3000 |
| Capacity | Swing over bed | mm | ø400 | ø410 | ø460 | ø580 | ø630 (ø720) |
| Swing over cross slide | mm | ø238 | ø280 | ø360 | ø410 (ø470) |
| Swing over gap | mm | - | ø680 | ø810 | ø870(ø960) | - |
| Distance between center | mm | 750 | 1060 | 1,000 | 1,490 | 1,500 | 2,000 | 2,095 | 3,090 |
| Spindle | Spindle nose | KS | A2-5 | A2-6 | A1-6 or D1-6 | A1-8 or D1-8 | A1-8 or D1-8 |
| Number of spindle speeds | step | 12 | 12 | 12 | 12 |
| Range of spindle speeds | rpm | 12 | 32 ~ 1,800 | 28 ~ 1,350 | 27 ~ 1,205 |
| Taper of spindle bore | M.T. | 12 | No. 6 | No. 7 | No. 7 |
| Spindle bore | mm | ø52 | ø58 | ø52 | ø77 | ø77 |
| Taper of center | M.T. | 12 | No. 4 | No. 5 | No. 5 |
| Carriage | Number of feed changes | step | 32 | 40 | 40 | 40 |
| Range of cross feeds | mm/rev | 0.014~0.192 | 0.012~0.174 | 0.047~0.732 & 0.19~2.92 | 0.04~0.62 & 0.16~2.50 | 0.041 ~ 1.16 |
| Range of longitudinal feeds | mm/rev | 0.06~0.84 | 0.055~0.766 | 0.047~0.732 & 0.19~2.92 | 0.038~0.58 & 0.15~2.32 | 0.039 ~ 1.10 |
| Cross slide travel | mm | 250 | 255 | 300 | 360 (390) |
| Compound rest travel | mm | 110 | 150 | 170 | 170 |
| Max. size cutting tool(b x h) | mm | 20 x 20 | 25 x 25 | 32 x 32 | 32 x 32 |
| Threads | Lead screw(dia. x pitch) | mm | ø32 x 6 | ø32 x 6 | ø38 x 6 | ø38 x 6 | ø40 x 12 |
| Inch threads | TPI | 56 ~ 4 | 112 ~ 2 | 112 ~ 2 | 56 ~ 2 |
| Metric threads | mm | 0.5 ~ 7 | 0.25 ~ 14 | 0.25 ~ 14 | 0.5 ~ 14 |
| D.P. threads | DP | - | 8 ~ 112 | 8 ~ 112 | 4 ~ 56 |
| Module threads | Module | - | 0.25 ~ 3.5 | 0.25 ~ 3.5 | 1 ~ 7 |
| Tail stock | Spindle travel | mm | 150 | 150 | 150 | 150 |
| Taper of center | M.T. | No. 4 | No. 4 | No. 5 | No. 5 |
| Bed | Width of bed | mm | 300 | 330 | 350 | 420 | 510 |
| Length of bed | mm | 1,600 | 1,950 | 2,040 | 2,530 | 2,705 | 3,205 | 3,452 | 4,452 |
| Motor | Main spindle motor | kW | 3/2 | 4/3 | 5.5 | 7.5 | 11 |
| Coolant pump motor | W | 100 | 100 | 100 | 100 |
| Power | kVA | 5 | 7 | 10 | 13 | 16 |
| Floor space required | mm | | | | | | | | |
| Net weight | kgf | 1,350 | 2,004 | 2,270 | 2,900 | 3,270 | 3,570 (3,670) | 3,700 (3,800) |
|
|
| Standard accessories | TOP |
|---|
| HL380 | HL410 | HL460 | HL580 | HL630(720) |
| 750 | 1000 | 1000 | 1500 | 1500 | 2000 | 2000 | 3000 |
| Chuck | 7" 3 jaw | 9" 3 jaw | 10" 3 jaw | 14" 4 jaw |
| Cneter sleeve | MT No.6 x No.4 | MT No.6 x No.4 | MT No.7 x No.5 | MT No.6 x No.4 |
| Change gear | 45T | 50T, 84T | 50T, 84T | 78T |
| Worm gear | 14T, 20T | 14T, 19T, 20T, 24T | 14T, 19T, 20T, 24T | 13T, 14T, 19T, 20T, 24T |
| Dead center | MT No.4 | MT No.4 | MT No.5 | MT No.5 |
| Live center | MT No.4 | MT No.4 | MT No.5 | MT No.5 |
| Steady rest | X | O | O | O |
| Follow rest | X | X | X | O | O |
| Face plate | X | X | X | O | O |
| Leveling block | O | O | O | O |
| Coolant equipment | O | O | O | O |
| Tool kit & box | O | O | O | O |
| Tailstock quill reduction device | X | O | O | O |
| Inching switch | X | O | O | O | O |
| Work light | O | O | O | O |
| Drawing hanger | X | O | O | O |
|
|
| Optional accessories | TOP |
|---|
| HL380 | HL410 | HL460 | HL580 | HL630(720) |
| 750 | 1000 | 1000 | 1500 | 1500 | 2000 | 2000 | 3000 |
| Chuck | 8" 4, 9" 3, 10" 4 jaw | 14" 4, 10" 3 jaw | 14" 4, 16" 4, 18" 4 jaw | 14" 3, 12" 4, 16"~24 4 jaw |
| Change gear | 40T, 50 , 157T | 71T | 71T | 65T, 157T |
| Worm gear | 13T, 16T, 19T, 22T, 24T | 13T, 22T | 13T, 22T | 13T, 22T |
| Driving plate | X | Ø240, Ø298 | Ø240(9.4) | Ø300(11.8) |
| Face plate | O | O | O | X | Ø635(25) |
| Steady rest | O | X | X | X |
| Steady rest (Oversized) | X | O | O | O |
| Steady rest (Roller type) | X | X | X | O |
| Follow rest | O | O | O | O | X | X |
| Taper attachment | O | O | O | O |
| Chip cover | O | O | O | O |
| Rear tool post | O | X | O | X |
| Carriage micro stopper | X | O | O | O |
| Drawing hanger | O | X | X | X |
|
|
|
 |
|
| TOP |
|---|
HMTH can perform vertical, horizontal, angle milling, drilling, boring, die sinking and jig boring easily.
HMTH can control the cutting speed suitable for tools, because its spindle speed has 16 different speed choices.
Machining accuracy is attained with DRO (Digital Read Out) glass scale.
Precision and accuracy is attained with precise ball screw and gib adjustment.
The head is adjustable to 90 degree to the table for maximum machining capability.
Lubrication is provided all sliding ways like column, saddle and cross slide with lubricating oil.v
| |
|
| TOP |
|---|
HMT / HMTH
Suitable for miilling, drilling, boring on Jig & Fixture
Wide speed range for suitable cutting speed
Suitable for vertical, horizontal, angle, miilling, drilling, boring for HMTH
Lubrication for easy sliding on Z axisMax.
turning of head for 180 degree, overarm for 180 degree
Easy cutting with automatic feed on quill
Automatic lubrication and safety device in all sliding system
HMV, HMVF
Spindle indexing of 90 degree for precise angle cutting
Easy cutting of drilling, boring due to the Z travel
Making cutting easy by Fly wheel that is used centrifugal force
Reduction of heat deformation for a long cutting keeping high accuracy
HMVF with A/C Ball bearing in Head stock which is suitable for high precise cutting.
HMVF with Ball screw of X & Y axis
Three axis of X, Y, Z simultaneous feed and rapid traverse
Lubrication system with supplying lubricant to all sliding way
| |
|
| TOP |
|---|
 | Head High power, low noise
2 kw Change motor, adjustable to right to table |
 | Manual feed lever for quill Easy operation for feed |
 | Column All slide ways are heat treated for maximum machine life. |
 | Automatic feed handle for quill Easy cutting of drill & boring |
 | Knee Accurate and alike ground surface
Excellent precision and duraility
Ultra wide-width guide way |
 | Digital counter (Sony) Available for three axis |
|
|
| TOP |
|---|
 | |  |
| Rotary table | | Tilting table |
 | |  |
| Index table | | halogen lamp |
|
|
| TOP |
|---|
| ITEMS | Unit | HMTH 1100/1300 | HMT 1100/1300 | HMVF-1100/1300 | HMV-1100/1300 |
| TABLE | Work suface (L x W) | mm | 1100/1300 x 280 (43.3/5.1 x 11.0) |
| T-slot (W x N x D) | mm | 16 x 3 x 60 (0.63 x 0.12 x 2.36) |
| Longitudinal travel | mm | 750 / 950 (29.5 / 37.4) |
| Cross travel | mm | 300 (11.8) |
| Vertical travel | mm | 450 (17.7) | 445 (17.5) |
| Longitudinal & cross feed | mm/min | 15 ∼720 (0.6~28.3) [12 steps] |
| Longitudinal & cross rapid | mm/min | 3000 (118.1) |
| Vertical rapid | mm/min | 800 (31.4) |
| VERTICAL SPINDLE | Range of speed | rpm | 75 ∼ 3600 [16 steps] | 95~1,400 [9 steps] |
| Spindle taper | NT | 40 | 50 |
| Quill movement | mm | 140 (5.5) | 90 (3.5) |
| Automatic spindle boring feeds | mm/rev | 0.035, 0.070, 0.140 | | 0.035, 0.070, 0.140(0.0013,0.0027,0.0055) |
| Head swivel | deg | 90 | 45 |
| Ram manual traverse | mm | 565 (22.2) | - |
| Ram manual swivel | mm | 180 | - |
| Spindle nose to table top | mm | 15 ~ 570 (0.6∼ 22.4) | 5~450(0.2~17.7) |
| HORIZONTAL SPINDLE | Range of speed | rpm | 95 ∼ 1400 [9 steps] | | - |
| Spindle taper | NT | 40(50) | | - |
| No. of speed change | step | 9 | | - |
| Spindle center to table top | mm | 30~480(1.2~18.8) | | - |
| MOTOR | Vertical | kW | 2/1 | 3.75 |
| Horizontal | kW | 3.75 | - | - |
| Feed drive | kW | 1.75 |
| Knee drive | kW | 0.75 |
| Slide Lubrication | W | 36 |
| Coolant pump | W | 100 |
| MACHINE SIZE | Dimension (LxWxH) | mm | 2450 / 2650 x 2100 x 2300 | 2450 / 2650 x 1800 x 1950 |
| Net weight | kgf(lbf) | 2226/2247(4906/4952) | 2027/2050(4467/10914) | 2300(5069) |
|
|
| Standard accessories | TOP |
|---|
| MTH | HMTH | HMVF-1100/1300 | HMV(F) |
| 1100 | 1300 | 1100 | 1300 | 1100 | 1300 |
| Drawing bolt(inch) | O | O | O |
| Leveling block | O | O | O |
| Milling arbor | X | 1" | X |
| Coolant plate | O | O | O |
| Tool kits box | O | O | O |
| Work light | O | O | O |
| Digital counter(3 axis) | X,Y,Z | X,Y,Z | X |
|
|
| Optional accessories | TOP |
|---|
| MTH | HMTH | HMV(F) |
| 1100 | 1300 | 1100 | 1300 | 1100 | 1300 |
| Milling arbor | X | 1 1/4" | X |
| Cutter arbor | 3" ,4", 5" | 3" ,4", 5" | 3" ,4", 5" |
| Boring arbor | X | X | O |
| Face cutter | 3" ,4", 5" | 3" ,4", 5" | 3" ,4", 5" |
| Plain vise | 6", 8" | 6", 8" | 6", 7", 8" |
| Hydraulic vise | 6", 8" | 6", 8" | 6", 8"O |
| Milling chuck | General | General | General |
| Quick change | Quick change | Quick change |
| Index | O | O | O |
| Rotary table | Ø300 | Ø300 | Ø300 |
| Auto tool | O | O | X |
| Clamping set | O | O | O |
| High column | 100 mm (3.9") | 100 mm (3.9") | X |
| Spindle taper(Horizontal) | X | NT50 | X |
| Spindle taper (Vertical) | X | X | NT40 |
| Variable head | X | 80∼3,800 rpm | X |
| Digital counter (3 axis) | X | X | X,Y,Z |
|
|
|
|
|
|
|
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)